/ News
Ink containing living cells to print tissue
Scientists in Australia are a step closer to printing living cells for tissue engineering with the development of a new bio-ink that allows the cells to stay alive until they are printed and not clog up the printer nozzle.
‘The first bio-inks used in drop-on-demand cell printing were simple salt solutions,’ says Marc in het Panhuis, who was part of the research team at the University of Wollongong. ‘The cells in these inks settled and aggregated quickly, which impeded printing. Cell viability can also be compromised if the salt concentration is too high.’
Other bio-inks include low viscosity biopolymer solutions, which are known to slow cell settling. The team’s bio-ink consists of a biopolymer – gellan gum – and two surfactants in a standard tissue culture medium. The surfactants – Novec FC4430 and Poloxamer 188 – reduce surface tension, allowing optimal inkjet printing, and protect the cells from fluid-mechanical damage.
The cells do not settle and aggregate because the biopolymer creates a structured network of micro-gel particles that keep the cells suspended in the gel. However, the bio-ink remains printable as the network is not rigid and is easily broken down during printing. ‘Our bio-ink allowed us to print multiple cell types over long printing periods without changing print heads or replenishing ink solutions,’ says in het Panhuis.
The team printed cells in specific patterns onto collagen hydrogel, a soft and wet substrate that acts as a cushion for the cells as well as preventing dehydration.
‘In getting going practically with this or any other cell printing process, someone has to work out how to load the cells into cartridges and keep them alive until they are printed,’ says Paul Calvert, an expert in regenerative biomaterials from the University of Massachusetts, Dartmouth, US. ‘During printing, they need to be fed (by the medium) and given oxygen (not sure how that will work) and then be printed without settling down to block the nozzles. This work addresses the last problem. They show that the cells don't die and go on to differentiate normally. This part has been shown before, but before this, people had to keep shaking the cartridge to keep the cells suspended.’
Inkjet printing of living cells is an important step towards in het Panhuis’s team’s goal of developing techniques for an all-printing approach to materials and devices for bionics and tissue engineering applications.
Source: http://www.rsc.org/chemistryworld/2012/10/bio-ink-print-living-cells
/ About us
Founded by Russian entrepreneur Dmitry Itskov in February 2011 with the participation of leading Russian specialists in the field of neural interfaces, robotics, artificial organs and systems.
The main goals of the 2045 Initiative: the creation and realization of a new strategy for the development of humanity which meets global civilization challenges; the creation of optimale conditions promoting the spiritual enlightenment of humanity; and the realization of a new futuristic reality based on 5 principles: high spirituality, high culture, high ethics, high science and high technologies.
The main science mega-project of the 2045 Initiative aims to create technologies enabling the transfer of a individual’s personality to a more advanced non-biological carrier, and extending life, including to the point of immortality. We devote particular attention to enabling the fullest possible dialogue between the world’s major spiritual traditions, science and society.
A large-scale transformation of humanity, comparable to some of the major spiritual and sci-tech revolutions in history, will require a new strategy. We believe this to be necessary to overcome existing crises, which threaten our planetary habitat and the continued existence of humanity as a species. With the 2045 Initiative, we hope to realize a new strategy for humanity's development, and in so doing, create a more productive, fulfilling, and satisfying future.
The "2045" team is working towards creating an international research center where leading scientists will be engaged in research and development in the fields of anthropomorphic robotics, living systems modeling and brain and consciousness modeling with the goal of transferring one’s individual consciousness to an artificial carrier and achieving cybernetic immortality.
An annual congress "The Global Future 2045" is organized by the Initiative to give platform for discussing mankind's evolutionary strategy based on technologies of cybernetic immortality as well as the possible impact of such technologies on global society, politics and economies of the future.
Future prospects of "2045" Initiative for society
2015-2020
The emergence and widespread use of affordable android "avatars" controlled by a "brain-computer" interface. Coupled with related technologies “avatars’ will give people a number of new features: ability to work in dangerous environments, perform rescue operations, travel in extreme situations etc.
Avatar components will be used in medicine for the rehabilitation of fully or partially disabled patients giving them prosthetic limbs or recover lost senses.
2020-2025
Creation of an autonomous life-support system for the human brain linked to a robot, ‘avatar’, will save people whose body is completely worn out or irreversibly damaged. Any patient with an intact brain will be able to return to a fully functioning bodily life. Such technologies will greatly enlarge the possibility of hybrid bio-electronic devices, thus creating a new IT revolution and will make all kinds of superimpositions of electronic and biological systems possible.
2030-2035
Creation of a computer model of the brain and human consciousness with the subsequent development of means to transfer individual consciousness onto an artificial carrier. This development will profoundly change the world, it will not only give everyone the possibility of cybernetic immortality but will also create a friendly artificial intelligence, expand human capabilities and provide opportunities for ordinary people to restore or modify their own brain multiple times. The final result at this stage can be a real revolution in the understanding of human nature that will completely change the human and technical prospects for humanity.
2045
This is the time when substance-independent minds will receive new bodies with capacities far exceeding those of ordinary humans. A new era for humanity will arrive! Changes will occur in all spheres of human activity – energy generation, transportation, politics, medicine, psychology, sciences, and so on.
Today it is hard to imagine a future when bodies consisting of nanorobots will become affordable and capable of taking any form. It is also hard to imagine body holograms featuring controlled matter. One thing is clear however: humanity, for the first time in its history, will make a fully managed evolutionary transition and eventually become a new species. Moreover, prerequisites for a large-scale expansion into outer space will be created as well.
Key elements of the project in the future
• International social movement
• social network immortal.me
• charitable foundation "Global Future 2045" (Foundation 2045)
• scientific research centre "Immortality"
• business incubator
• University of "Immortality"
• annual award for contribution to the realization of the project of "Immortality”.
/ Follow us at:
/ Contact:
For additional information, partnerships and sponsorship, contact:
info@2045.com
Media requesting information and interviews, contact PR@2045.com
LinkedIn
LiveJournal
Google
Twitter
Facebook
Я.ру
ВКонтакте
Mail.ru