/ News
Flexible, semitransparent power source made with novel comb-teeth structure
(Left) In the sandwich structure, the two electrodes occupy different layers and face each other. (Right) In the new comb-teeth structure, the two electrodes are integrated in the same plane. The empty space in between them allows for the structure to be flexible and semitransparent. Credit: Heng Lit, et al.
Most batteries, supercapacitors, and other energy storage devices are based on a sandwich structure, where two electrodes face each other and the charge flows between them. However, when these structures are folded or bent, the electrodes can easily fracture or the device can short-circuit if the electrodes come in direct contact. In a new study, researchers have come up with a new design for energy storage devices that is both flexible and semitransparent, in which the electrodes are fabricated on the same two-dimensional plane in a novel comb-teeth structure.
The researchers, Heng Li, et al., from the School of Physics at Peking University in China, have published their paper on the new structure for flexible and semitransparent electrochemical devices in a recent issue of Nano Letters.
As the researchers explain, the key to achieving the device's flexibility and semitransparency is the electrode comb-teeth pattern. The researchers demonstrated that the new structures can withstand many cycles of bending and rebending—and even be wrapped around a pen—while retaining nearly all of their good performance.
The structures don't require spacers like those used by some sandwich-structure devices to prevent short circuiting. Instead, the new structures can be easily bent because there is natural empty space between two neighboring comb-tooth areas.
The design also lends itself to semitransparency because the sizes of the electrode comb-teeth are less than 100 μm, which is the resolution limit of the naked eye. Using photolithography, the researchers could fabricate comb -teeth with widths of 40-60 μm, allowing for good light penetration.
Although other transparent, flexible energy storage devices have been previously demonstrated, these designs generally require complex and expensive processes and are not universal to other energy device systems. In contrast, the new comb-teeth structures can be fabricated with simple methods and can be integrated with other electronic systems.
"In recent years, flexible electronics have become a hotspot and there has been an explosion of originalities and ideas in the area," coauthor Dapeng Yu at Peking University told Phys.org. He explained that the idea for the design stems from a study that he and some of the other authors published last year on solar cells made with wire electrodes.
"The electrochemical energy devices (they can be understood as batteries or cells) composed of two fibers (one is anode, the other is cathode) are highly bendable," Yu said. "We were inspired by the idea, and tried to integrate the fiber-like electrodes together to fabricate a planar device.
As we know, there are some similar designs in this area. For instance, the interdigital structure is applied to supercapacitors, but they are all fabricated on rigid and opaque substrates like silicon. Therefore, they cannot realize device transparency and flexibility."
Here, the researchers demonstrated the new comb-teeth structure by fabricating dye-sensitized solar cells and supercapacitors based on the new design. The flexible, semitransparent solar cells could one day have applications in smart windows, building-integrated photovoltaics, and integrated photovoltaic chargers for portable electronics. The supercapacitors could also have a variety of applications, including for next-generation all-in-one transparent and wearable electronic systems.
In addition to dye-sensitized solar cells and supercapacitors, the comb-teeth design could also be extended to other electrochemical systems such as alkaline batteries, quantum dot solar cells, and other energy storage and generation devices.
"Theoretically, the comb-teeth structure can be applied to almost all kinds of electrochemical devices," coauthor Qing Zhao at Peking University said.
"However, the fabrication process must be redesigned for individual electrochemical materials. And we plan to develop more kinds of flexible and semitransparent batteries or cells using the planar structure design. On the other hand, the efficiency of these flexible and transparent devices is a little lower than that of traditional devices now, and we want to improve their performance in the future."
More information: Heng Li, et al. "Novel Planar-Structure Electrochemical Devices for Highly Flexible Semitransparent Power Generation/Storage Sources." Nano Letters. DOI: 10.1021/nl4000079 Journal reference: Nano Letters
Source: http://phys.org/news/2013-03-flexible-semitransparent-power-source-comb-teeth.html
/ About us
Founded by Russian entrepreneur Dmitry Itskov in February 2011 with the participation of leading Russian specialists in the field of neural interfaces, robotics, artificial organs and systems.
The main goals of the 2045 Initiative: the creation and realization of a new strategy for the development of humanity which meets global civilization challenges; the creation of optimale conditions promoting the spiritual enlightenment of humanity; and the realization of a new futuristic reality based on 5 principles: high spirituality, high culture, high ethics, high science and high technologies.
The main science mega-project of the 2045 Initiative aims to create technologies enabling the transfer of a individual’s personality to a more advanced non-biological carrier, and extending life, including to the point of immortality. We devote particular attention to enabling the fullest possible dialogue between the world’s major spiritual traditions, science and society.
A large-scale transformation of humanity, comparable to some of the major spiritual and sci-tech revolutions in history, will require a new strategy. We believe this to be necessary to overcome existing crises, which threaten our planetary habitat and the continued existence of humanity as a species. With the 2045 Initiative, we hope to realize a new strategy for humanity's development, and in so doing, create a more productive, fulfilling, and satisfying future.
The "2045" team is working towards creating an international research center where leading scientists will be engaged in research and development in the fields of anthropomorphic robotics, living systems modeling and brain and consciousness modeling with the goal of transferring one’s individual consciousness to an artificial carrier and achieving cybernetic immortality.
An annual congress "The Global Future 2045" is organized by the Initiative to give platform for discussing mankind's evolutionary strategy based on technologies of cybernetic immortality as well as the possible impact of such technologies on global society, politics and economies of the future.
Future prospects of "2045" Initiative for society
2015-2020
The emergence and widespread use of affordable android "avatars" controlled by a "brain-computer" interface. Coupled with related technologies “avatars’ will give people a number of new features: ability to work in dangerous environments, perform rescue operations, travel in extreme situations etc.
Avatar components will be used in medicine for the rehabilitation of fully or partially disabled patients giving them prosthetic limbs or recover lost senses.
2020-2025
Creation of an autonomous life-support system for the human brain linked to a robot, ‘avatar’, will save people whose body is completely worn out or irreversibly damaged. Any patient with an intact brain will be able to return to a fully functioning bodily life. Such technologies will greatly enlarge the possibility of hybrid bio-electronic devices, thus creating a new IT revolution and will make all kinds of superimpositions of electronic and biological systems possible.
2030-2035
Creation of a computer model of the brain and human consciousness with the subsequent development of means to transfer individual consciousness onto an artificial carrier. This development will profoundly change the world, it will not only give everyone the possibility of cybernetic immortality but will also create a friendly artificial intelligence, expand human capabilities and provide opportunities for ordinary people to restore or modify their own brain multiple times. The final result at this stage can be a real revolution in the understanding of human nature that will completely change the human and technical prospects for humanity.
2045
This is the time when substance-independent minds will receive new bodies with capacities far exceeding those of ordinary humans. A new era for humanity will arrive! Changes will occur in all spheres of human activity – energy generation, transportation, politics, medicine, psychology, sciences, and so on.
Today it is hard to imagine a future when bodies consisting of nanorobots will become affordable and capable of taking any form. It is also hard to imagine body holograms featuring controlled matter. One thing is clear however: humanity, for the first time in its history, will make a fully managed evolutionary transition and eventually become a new species. Moreover, prerequisites for a large-scale expansion into outer space will be created as well.
Key elements of the project in the future
• International social movement
• social network immortal.me
• charitable foundation "Global Future 2045" (Foundation 2045)
• scientific research centre "Immortality"
• business incubator
• University of "Immortality"
• annual award for contribution to the realization of the project of "Immortality”.
/ Follow us at:
/ Contact:
For additional information, partnerships and sponsorship, contact:
info@2045.com
Media requesting information and interviews, contact PR@2045.com
LinkedIn
LiveJournal
Google
Twitter
Facebook
Я.ру
ВКонтакте
Mail.ru